Installation of ballasted solar racking is generally more suitable for installation on the roof or a higher geographical location. If the installed solar panels are used as households, they are generally facing south and facing 5 to 10 degrees west to the west, ensuring no sunlight. Minimize the entry pipeline and increase the sunshine time.
Of course, if you want to install photovoltaic solar energy, you must first understand what kind of roof is suitable for installing ballasted solar racking.
ballasted solar racking manufacturers installation precautions
When testing the ballasted solar racking, there is a certain deviation in the product. Although it is not known what is the source of such a problem, it is certain that this will inevitably have a certain degree of influence on the use of the entire photovoltaic product. The way to solve it.
What should you pay attention to when using ballasted solar racking? At present, there are two main ways to install the solar photovoltaic support bases, which are common and commonly used.
The ballasted solar racking system commonly used in China is divided into three types according to the layout data: concrete support, steel support and aluminum alloy photovoltaic support. The following is the detailed information.
Ballasted solar mounting application will increase the reuse of space, and successfully solve the problems of traditional photovoltaic support systems such as large lateral span and perishable rust;
Photovoltaic building materials and ballasted solar mounting shall be inspected, cleaned, maintained and maintained by qualified personnel on a regular basis. If the following problems are found, they shall be adjusted or replaced immediately:
When testing the solar stent, there was a certain deviation in the product. Although I don’t know what the root cause of the problem is, it is certain that this will inevitably affect the use of the entire photovoltaic product to a certain extent. The way to solve it.
For the ballasted solar racking, the device connection method can be simply divided into two types, one is an assembled aluminum alloy solar bracket, and the other is a welded solar bracket; in many cases, the majority of users understand the difference between the two brackets. Deep, for these related experts to introduce to you.
Photovoltaic equipment is supported by ballasted solar mounting. What equipment is used to keep the photovoltaic support stable?
When testing the ballasted solar mounting, there is a certain deviation in the product. Although it is not known what is the source of such a problem, it is certain that this will inevitably have a certain degree of impact on the use of the entire photovoltaic product. The way to solve it.