English
  • 中文简体
  • English
  • 日本語
  • 한국어
Home> News>Industry Information>The effect of the material of the photovoltaic support on the efficiency of the point

The effect of the material of the photovoltaic support on the efficiency of the point

From:Serve (Xiamen) New Energy Co., Ltd.     Release time:2019-04-28

Overview:When testing the ballasted solar racking, there is a certain deviation in the product. Although it is not known what is the source of such a problem, it is certain that this will inevitably have a certain degree of influence on the use of the entire photovoltaic product. The way to solve it.

When testing the ballasted solar racking, there is a certain deviation in the product. Although it is not known what is the source of such a problem, it is certain that this will inevitably have a certain degree of influence on the use of the entire photovoltaic product. The way to solve it.

The degree of deviation of the photovoltaic support is different, and the treatment method is different, or it should be carried out according to the actual situation. For example, when the bolt of the photovoltaic support is deformed, it can be tapped with a sledgehammer. In order to play the role of reinforcement, it is necessary to weld the steel plate after correction. If the deviation appears on the bolt spacing, it is recommended that you use the oxyacetylene flame to bake red and then tap, but the welded steel plate is the same.

What if the bolt is not deformed but a large offset occurs? What we can do is to cut the offset bolt and weld it to the steel plate. The purpose of this is to prevent the deviation from expanding.

With the popularity of photovoltaic products in life, people have a deeper understanding of their supporting accessories - photovoltaic brackets, in addition to providing a stable foundation for photovoltaic equipment, it can also play a role in the power generation efficiency of equipment. . However, due to the different types of photovoltaic supports, the degree of impact is also different, so we must first know what kind of direct photovoltaic power generation efficiency is high?

The common photovoltaic brackets are mainly fixed and rotary. The orientation of the components of the former is constant, and the latter moves with the change of the sunlight angle. In contrast, rotating photovoltaic supports can fully absorb sunlight, and the efficiency of power generation is also improved, but the cost of such photovoltaic supports is relatively high.

Since the rotating photovoltaic support is more conducive to power generation, how to use this product in most occasions, and if it is used on the ground, it is also hot-dip galvanized; if it is replaced by the roof, Rotating photovoltaic supports made of aluminum profiles will be more. If you want to learn more about ballasted solar mounting,you can contact us.


Message BoardPlease write down your question and we will respond to you within 24 hours.